Menu
Your Cart

WUPP CS-095D1 Motorcycle Modified Adjustable Temperature Silicone Universal Electric Heating Hand Cover Heated Grip Handlebar(Black)

WUPP CS-095D1 Motorcycle Modified Adjustable Temperature Silicone Universal Electric Heating Hand Cover Heated Grip Handlebar(Black)
-25 %
WUPP CS-095D1 Motorcycle Modified Adjustable Temperature Silicone Universal Electric Heating Hand Cover Heated Grip Handlebar(Black)
  • Stock: In Stock
  • Weight: 0.50kg
  • Dimensions: 19.00cm x 12.00cm x 5.00cm
  • SKU: MOTO-ACC-SNY-4002
This offer ends in:
Day
Hour
Min
Sec
Rs.1,664.00
Rs.2,214.00
Ex Tax: Rs.1,664.00

WUPP CS-095D1 Motorcycle Modified Adjustable Temperature Silicone Universal Electric Heating Hand Cover Heated Grip Handlebar(Black)

Product Features

  • 1. 2V voltage, 22MM handlebar inner diameter, suitable for most motorcycles
  • 2. The product is equipped with high and low gear switches, and the handle temperature can be adjusted at will (50-70 degrees Celsius adjustable)
  • 3. Double throttle cable buckle, wider installation range
  • 4. The design can be sealed and can be opened, which will not affect the installation of the handle outside the handle, and then the lights and other decorative accessories are more beautiful and convenient
  • 5. Input voltage: 12V
  • 6. Power: 15W-35W adjustable
  • 7. Length: left hand handle 143x36mm; right hand handle 127x36mm
  • Installation notes:
  • 1. Remove the original handlebar
  • 2. Use the left hand to moisten the inner hole with soapy water, and the twist should not be too large during installation
  • 3. When installing the balance iron on the left hand handle, adjust the position of the balance iron to be slightly separated from the handle, and do not squeeze the handle when tightening the screw
  • 4. If you use the left handle to slide on a steel pipe, remove the balance iron, and fix it with a few drops of 502 glue from the end of the handle
  • 5. The power cord, the red wire is connected to the positive pole, and the black wire is connected to the negative pole, the temperature cannot be adjusted when reverse connection
  • 6. When installing the left-hand handle, the power cord should be left enough for rotation
  • Precautions:
  • 1. When installing the left handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift
  • 2. For models with balance iron, please adjust the installation position of the balance iron. Do not squeeze the handle when tightening the screws. The balance iron is slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a spacer between the balance iron and the handle. Excessive squeezing of the handle will cause difficulty in turning the handle switch and abnormal damage such as the heating wire squeezing out of the handle surface.

Delivery Details

We ship via top couriers like Blue Dart, Delhivery, DTDC, and Ekart.

Have a preferred courier? Let us know and we�ll try to arrange it for you.

Note: This product is in limited stock, and due to high order volumes, it may occasionally ship from our international or overseas warehouse. In such cases, delivery can take an additional 10 to 14 days. Once the product reaches our Indian warehouse, we will promptly share tracking details with you.

Need Assistance?
Call: +918419008700

Write a review

Note: HTML is not translated!
Bad Good